TG 73-200
An indestructible machine for
your static and dynamic
penetrometric tests
Static from 115.000,00 €
Static/Dynamic from 127.500,00 €
High quality
Fitted on a hydraulic-tracked carriage, which allows
you to move even on the most marshy terrain.
It can even be positioned on very steep slopes;
thanks to the three stabilisers and the possibility of tilting the mast,
a perfect verticality is guaranteed to allow rod insertion.
High energy efficiency
Around 78% of the energy is
transmitted to the rods.
Can be used
by a single operator
High quality and high performance
in a penetrometer that can be
used even by a single operator.
Drastically reduced test times, thanks to the automatic anchoring system and the possibility of driving the rods and their liner tubes into the ground at the same time.
Versatility
Static tests can be carried out with Begemann bit (CPT),
or with piezocone (CPTu) which can be
implemented with the seismic module (S-CPTu).
The hammer system for dynamic tests can be:
Super Heavy (DPSH), Heavy (DPH) or Medium (DPM).
The rotation head allows overcoming even the hardest terrains.
Different types of samplers are also available to allow
laboratory analysis of disturbed samples.
CPT configuration
(static test)
CPT+DP configuration
(static/dynamic test)
Configurations suited
to any situation
Static penetrometric tests can be carried out with a Begemann bit (CPT), or with a piezocone (CPTu) - which allows a more reliable stratigraphic interpretation - and can be implemented with the seismic module (S-CPTu) to determine the profile of the speed of the shear waves (Vs).
As regards the dynamic tests, depending on the most commonly
tested soil types, the penetrometer can be equipped with different
hammer systems: Super Heavy (DPSH), Heavy (DPH) or Medium (DPM).
By choosing the static/dynamic configuration, you can obtain information along verticals consisting of soil with different mechanical characteristics (from very soft to very hard and compact).