Broad mobility
Fitted on a hydraulic-tracked carriage, which allows
you to move easily even on the most marshy terrain.
It can even be positioned on very steep slopes; thanks to the three
stabilisers and the possibility of tilting the mast, a perfect
verticality is guaranteed to allow rod insertion.
High energy efficiency
Around 78% of the energy
is transmitted to the rods.
Can be used
by a single operator
High performance in a compact and easily
transported penetrometer, which can be
used even by a single operator.
Drastically reduced test times, thanks to the semi-automatic anchoring system and the possibility of driving the rods and their liner tubes into the ground at the same time.
Versatility
Static tests can be carried out with
Begemann bit (CPT), or with piezocone (CPTu)
which can be implemented with the seismic module (S-CPTu).
The hammer system for dynamic tests can be:
Super Heavy (DPSH), Heavy (DPH) or Medium (DPM).
The rotation head allows to drill some little pre-holes.
Different types of samplers are also available to allow
laboratory analysis of disturbed samples.
CPT configuration
(dynamic test)
CPT+DP configuration
(static/dynamic test)
Configurations
suited to any situation
Static penetrometric tests can be carried out with a Begemann bit (CPT), or with a piezocone (CPTu) - which allows a more reliable stratigraphic interpretation - and can be implemented with the seismic module (S-CPTu) to determine the profile of the
speed of the shear waves (Vs).
As regards the dynamic tests, depending on the most commonly tested soil types, the penetrometer can be equipped with different hammer systems: Super Heavy (DPSH), Heavy (DPH) or Medium (DPM).
By choosing the static/dynamic configuration, you can obtain information along verticals consisting of soil with different mechanical characteristics (from very soft to very hard and compact).